Automate Wi-Fi Hacking with Wifite2 2020 Easy Method

There are many ways to attack a Wi-Fi network. The type of encryption, the manufacturer's settings, and the number of customers connected all determine how easily the target attacks and which method will work best. Wifite2 is a powerful tool that makes Wi-Fi hacking standalone, allowing you to select the set objectives and let the script choose the best strategy for each network.

Wifite2 vs. Wifite

Wifite has been around for a long time and was one of the first Wi-Fi hacking tools to be sent. In line with Besside-ng, automated Wi-Fi hacking tools have also enabled kids to write to make a great impact without knowing much about how the script works. Compared to Besside-ng, the original Wifite was very effective in using all available tools to attack the network, but it was also slow.

One of the best features of real Wifite is that it performs a Wi-Fi site survey before attacking nearby networks, allowing the giant to easily select one, more, or all nearby networks as objectives. By setting available goals in an easy-to-understand format, even a beginner can understand which attacks might work best for nearby networks.

Don't miss: How to Recover Files from Corrupted USB Drive

Real Wifite will automatically attack WPA networks by trying to capture a handshake or by using the Reverver tool to force the WPS setup PIN of nearby networks. While this method works well, it may take 8 hours or more to complete.

Updated WiFite2 is much faster, attacking in less time and relying on more pure tactics than the previous version. As a result, Wifite2 is a wider and more powerful Wi-Fi hacking tool than the original Wifite.

Attack Flow for Wifi Hacking

Wifite2 follows a simple but effective workflow to hack nearby networks very quickly. In doing so, he pushes every tactic with which he tries to limit the effectiveness, even going so far as to try to break up any handshake he finds.

In the first step, Wifite2 scans all channels looking for any network in the range. It sets these networks available with the power of a signal, as the acquired network does not guarantee that you can communicate with them reliably.

Organized from the strongest signal strengths, the redundancy phase includes the collection of information about which networks are closest and which hacking strategies are most likely to be at risk. Because of the way Wifite2 is structured, it is easy to install a Wi-Fi oriental antenna to use Wifite2 to find the source of any nearby Wi-Fi network while conducting a site survey.

After the site survey is completed, any targets displayed will indicate whether there are any connected clients, whether the network is advertising WPS, and what type of encryption the network is using. Depending on the attacker, the attacker may select any target, group of stones, or all the stones to start the attack based on the information gathered.

Wifite2 will move on to a list of indicators that start with quick and easy attacks, such as WPS-Pixie, which can lead to password breaches in seconds, to uncertain strategies such as checking weak passwords for dictionary attacks. If the attack fails or lasts too long, Wifite2 will move on to the next active attack without spending hours like the previous one used to do.

What you need

To get started, you'll need a Wi-Fi network adapter that you can install in wireless monitoring mode. This means choosing one that is compatible with Kali Linux, which has many excellent guidelines for doing so.

Best Recommended Wifi Adapter for Hacking

Wifite2 is pre installed on Kali Linux, so I recommend that you use Kali on a virtual machine or a dual-booted laptop. You can use Wifite2 in other Linux programs, but I will not pass the installation as this guide assumes you are using Kali Linux.

Step 1: Install Wifite2

If you do not have Wifite2 installed on your system, you can do that from the end of GitHub. First, you can capture the archive by opening the last window and then typing the following commands.

This should download and install Wifite2 on your system. To check if it works, you can type wifite -h to see details in the installed version.

Step 2: Connect your Wi-Fi Card

Since Wifite2 is installed on your system, you will need to connect a wireless network adapter compatible with Kali Linux. Wifite2 not only takes care of automatically selecting the wireless network adapter for use but also puts that wireless card in monitoring mode for you, which means you don't have to do anything after connecting the adapter.

Don't MissHow to Activate Compact OS Feature in Windows

Step 3: Set Flags & Get Targeted

Once we know which channel we are attacking, we can select it by adding the command -c followed by the channel number. Besides, using Wifite2 is as easy as typing wifite and letting the script collect data.

Here, we did a scan at station 11 and found 10 different targets. For those purposes, two have connected clients, one has WPS enabled, and all use WPA security.

Step 4: Check the Site Survey and Select Target

From our experimental survey, we can see that a target of 5 can bring out the best target. While signal strength is not very good, and there are no clients connected, we may shake hands with the new PMKID attack even if no one is connected.

If we are looking for weak passwords, the first three most powerful signal networks, while targets 4 and 7 have a very good chance of hitting a four-way handshake quickly to try to forcefully coerce later. If we identify a specific network, this is where we can choose it. If we want to select as many networks as possible, we can select 4, 5, and 7 targets for instantaneous handshake and crack, if the WPS PIN is not cracked first.

If we want to focus on simple targets, we can tell the script to show only the vulnerabilities that are at risk of being attacked. Only targeted WPS targeting that may be at risk of being attacked by Reaver or Bully, we can use Wifite2 and wps flag.

We can do the same with wpa or -wep to show only the purposes associated with these types of encryption.

Step 5: Automate Attacks by Targets Type

In our list of results, let's select a target for both WPS enabled and attached clients. After selecting the network number we wish to attack, Wifite2 will proceed with the basic attack on the network.

Here, we see that while the WPS-Pixie attack failed, we were able to capture and attack the handshake easily. The WPS-Pixie attack has expired very quickly, so we spent a little bit of time exploring this attack method. Sometimes, different wireless cards work better with different texts, and this is true for Rever and Bully. If one doesn't work for you, try another.

Don't Miss: How to Hack Facebook Withour Phishing SOP (Same Origin Policy)

Wifite2 uses Reaver by default, but you can convert this to Bully by using the bully flag.

While we do not have the best results with Bully, trying both is a great way to find out which wireless network adapter works best for you.

Step 6: Skip & Check Results

If Wifite2 takes too long for any specific attack, we can always skip the current attack by pressing Ctrl-C to bring up a menu asking if we would like to continue. Here, you can skip to the next attack by pressing c, or type s to stop Wifite2.

If we can only get a handshake in four ways, then we might want to add a list of custom dictionaries to guess the password to try to crack the handshake. We can do this by setting the flag --dict to set the file containing the crack passwords, the default is set to /usr/share/wordlists/fern-wifi/common.txt. This password list contains many common passwords, but you'll want to use your own if you want to get results.

Below, we have successfully removed the encryption link for you using the custom dictionary "passwords.txt."

By adding a good password file, we can improve our chances of cracking the Wi-Fi network password even if a quick WPS attack fails.

Some Practical Warnings and Defenses

Wifite2 is an example of how child scripts can work on networks with common disabilities such as WPS set PINs and weak passwords. As the increasing number of advanced attacks become more automatic, it is important that you learn about the most common and effective methods of attacking the Wi-Fi network.

Don't Miss: How to Hack any Android Phone Remotely 2020

In general, the best way to secure your network with tools like Wifite2 is to make sure you disable WPS and choose the most powerful password for your Wi-Fi network that you don't share with anyone you don't need.

It is important to note that by selecting "all" in the target list, Wifite2 will attack all the networks it has found, not the only ones you have permission to attack. You must have permission to use this tool on any network that you are attacking, because hacking someone's network without permission is a crime and could put you in serious trouble. To say that the script did not make an excuse when you were caught attacking an important network, so be sure to keep Wifite2 targeted at networks you have permission to research.

I hope you enjoyed this automated guide to hack Wi-Fi via Wifite2! If you have questions about this tutorial on Wi-Fi hacking tools or have comments, feel free to write them below in the comments or contact me on Twitter @BhatAasim9.

Post a Comment